- Home
- ยป
- Products We Offer
- »
- Wear Resistance Steel Plates
Wear Resistance Steel Plates
SSAB is the world leader in wear plates like Hardox, Weldox, Domex, Armox, Toolox etc. We M/S Leomet Alloys Inc are the authorized imported of these plates in India.
We deal in all types of wear plates like HARDOX, SUMIHARD, ABREX, SWEBOR, QUARD
AR WRS 500 Steel Plates
Material Grade | 540 |
Material | Steel |
Usage/Application | Industrial |
Thickness | 130 mm |
Width | Up to 3000mm |
Length | Up to 12000 mm |
WRS 50000 is an abrasion resistant plate with a hardness of 500 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. Hardox 400 offers very good weld ability.
Applications
Crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, dump trucks, loaders, industrial trucks, lorries, bulldozers, excavators, slurry pipe systems, screw conveyors, presses etc.
Hardness HBW : 460-540
Heat Treatment :
WRS 500 has obtained its mechanical properties by quenching and when necessary by means of and Fabrication subsequent tempering. The properties of the delivery condition can not be retained after exposure to service or preheating\ temperatures in excess of 250oC (480o F).
Hardox 400 is not intended for further heat treatment For information concerning welding and fabrication please send us
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.
AR WRS 500 Steel Plates in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi & Oman.
Abrex 500 Plates
Brand | NSSMC JAPAN MAKE |
Material | Metal |
Material Grade | ABREX 500 |
Thickness | 4-5 mm, 0-1 mm, 2-3 mm, 1-2 mm, 3-4 mm |
Shape | Rectangular |
Usage/Application | Industrial |
Color | Natural |
Type | Plates |
Size | As Per Requirement |
Steel Grade | 400 |
About Product:
ABREX 500 is a through hardened abrasion resistant steel with a typical hardness of 515 BHN. Abrex 500 are the most widely used of the wear resistant grades. Abrex 500 exhibit an excellent combination of high resistance to impact, workability, weld ability and resistance to abrasion. It has about 3 times the abrasion resistance of common steel plate and contributes to prolonging the service life of mechanical parts.
Application of Abrex 500 Plates:
•Dump Truck Liners
•Cutting Edges
•Ripper Tyne
•Crusher Liner Plates
•Drag line Bucket Wear Liners
•Screen Plates - Chute Liners
•Conveyor Buckets
•Hoppers
•Ore Scrapers
Specifications:
•Size : 5mm ~ 120 mm
•Width : Up to 3000 mm
•Length : Up to 12000 mm
Abrex 500 Plate in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide
Quard 400 Plates
Material Grade | 400 |
Brand | Quard |
Usage/Application | Crushers |
Size | 1500 Width |
Thickness | 4 mm |
About Product:
Leomet is engaged in supply of Quard 400. Due to its optimal combination in hardness, strength and ductility, Quard 400 can be used in any application exposed to wear from various hard abrasives such as rocks, sand, minerals, scrap, waste or other aggressive materials.
Quard 400 is easy to bend, cut, machine and weld (to some extent, it’s like processing mild steel).
In all thicknesses Quard 400 is combined with an excellent surface finish and close thickness tolerances, providing your final application with a high quality look and accurate design fitting .
Quard 400 is ideal to be used in applications like: buckets, crushers, cutting edges, dump trucks, loaders, skips, sieves, feeders, measuring pockets, skips.
Hardness Quard get its high hardness and strength through a precise water quenching process.
The hardness is mainly controlled by the carbon content and by using accurate alloy compositions the scatter in hardness and other properties can be kept to a minimun.
The production process of Quard produces a lath type of martensitic structure of high hardness, strength and toughness, granting 100% through thickness hardening.
Quard 400 Plates also available in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide
Swebor 450 Plates
Material Grade | 410 |
Thickness | 4 mm |
Shape | Plate |
Elongation Min% | 8 |
Impact strength KV -20 DegreeC: J | 20 |
CEV | 0.45 |
Yield Strength | 0.2 N/mm2 |
Swebor 450 Plates in DUBAI, UAE, SAUDI, EGYPT, BRAZIL, INDONESIA, CHINA, SOUTH AFRICA, USA, EUROPE
Swebor 450 is used to endure conditions of heavy wear and when great strength and good weld ability is required. Swebor 450 is used in applications such as loader buckets, mining truck bodies, wearing parts of agricultural machines, wearing parts of mining machines, waste removal equipment and cement trucks, wear plates, where demands on wear resistance are high. By using Swebor 450 thinner dimensions can be used and overall vehicle weight lowered, thus enabling increased payloads.
Mechanical Properties:
- Thickness: 2.5mm ~ 16mm
- Hardness HBW ± 10% : 450
- Weight : The weight can be calculated using a density of 8 g/cm3
Surface : Heat-treated and brushed mill finish. VCI treatment can be obtained upon agreement
Welding : Swebor 450 can be welded. However, when the combined sheet thickness exceeds 30 mm preheating is needed. Approx. 100°C is the advisable temperature for preheating. Plates must be clean and dry. Commonly used filler metals for quenched steels are Esab 48.00 and OK autrod 12.51. If high strength is required for filler metal OK 75.75 or Ok Autrod 13.10/13.12 are suitable. Equivalent filler metals from other suppliers can also be used. Always use low-hydrogen welding consumables.
Bending : Bending should be done with one press» Slow pressing speed is recommended» Lower tool should be roller-type
Drilling, turning and milling : Swebor 450 can be machined with high-speed steel and hard metal tools with a satisfactory service life if the feed rates and cutting speeds are correspondingly accommodated
Swebor 400 Plates
Thickness | 4 mm |
Elongation Min % | 10% |
Impact strength KV | 40 DegreeC |
CEV | 0.42 |
Yield Strength | 1050 |
Hardness HBW | 10% |
Applications:
Swebor 400 is used to endure conditions of heavy wear and when great strength and good weld ability is required. Swebor 400 is used in applications such as loader buckets, mining truck bodies, wearing parts of agricultural machines, wearing parts of mining machines, waste removal equipment and cement trucks, wear plates, where demands on wear resistance are high. By using Swebor 400 thinner dimensions can be used and overall vehicle weight lowered, thus enabling increased payloads.
Mechanical Properties
- Thickness: 2.5mm ~ 16mm
- Yield Strength Rp0.2 N/mm² : 1050
- Weight : The weight can be calculated using a density of 8 g/cm3
Surface : Heat-treated and brushed mill finish. VCI treatment can be obtained upon agreement
Welding : Swebor 400 can be welded. However, when the combined sheet thickness exceeds 30 mm preheating is needed. Approx. 100°C is the advisable temperature for preheating. Plates must be clean and dry. Commonly used filler metals for quenched steels are Esab 48.00 and OK autrod 12.51. If high strength is required for filler metal OK 75.75 or Ok Autrod 13.10/13.12 are suitable. Equivalent filler metals from other suppliers can also be used. Always use low-hydrogen welding consumables.
Bending : Bending should be done with one press» Slow pressing speed is recommended» Lower tool should be roller-type
Drilling, turning and milling : Swebor 400 can be machined with high-speed steel and hard metal tools with a satisfactory service life if the feed rates and cutting speeds are correspondingly accommodated
Swebor 400 Plates in DUBAI, UAE, SAUDI, EGYPT, BRAZIL, INDONESIA, CHINA, SOUTH AFRICA, USA, EUROPE
Swebor 500 Plates
Thickness | 4 mm |
Color | Brown |
Elongation Min % | 6% |
Tensile strength | 1600 Rm |
CEV | 0.53 |
Applications:
Swebor 500 is used to endure conditions of heavy wear and when great strength and good weld ability is required. Swebor 500 is used in applications such as loader buckets, mining truck bodies, wearing parts of agricultural machines, wearing parts of mining machines, waste removal equipment and cement trucks, wear plates, where demands on wear resistance are high. By using Swebor 500 thinner dimensions can be used and overall vehicle weight lowered, thus enabling increased payloads.
Mechanical Properties:
- Thickness: 2.5mm -16mm
- Weight: The weight can be calculated using a density of 8 g/cm3
Surface : Heat-treated and brushed mill finish. VCI treatment can be obtained upon agreement
Welding : Swebor 500 can be welded. However, when the combined sheet thickness exceeds 30 mm preheating is needed. Approx. 100°C is the advisable temperature for preheating. Plates must be clean and dry. Commonly used filler metals for quenched steels are Esab 48.00 and OK Autrod 12.51. If high strength is required for filler metal OK 75.75 or OK Autrod 13.10/13.12 are suitable. Equivalent filler metals from other suppliers can also be used. Always use low-hydrogen welding consumables.
Bending : Bending should be done with one press» Slow pressing speed is recommended» Lower tool should be roller-type
Drilling, turning and milling : Swebor 500 can be machined with high-speed steel and hard metal tools with a satisfactory service life if the feed rates and cutting speeds are correspondingly accommodated
Swebor 500 Plates in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi & Oman
Additional Information:
- Item Code: SWEBOR500
Sumihard 500 Plates
Thickness | 3 mm |
Material Grade | Abrex 400 |
Size (feet X feet) | 120 mm |
Width | Up to 3000 mm |
Length | Up to 12000 mm |
About Product:
SUMIHARD 500 (NOW KNOW AS ABREX 500) is a through hardened abrasion resistant steel with a typical hardness of 415 BHN. These steels are the most widely used of the wear resistant grades. They exhibit an excellent combination of high resistance to impact, workability, weld ability and resistance to abrasion. It has about 3 times the abrasion resistance of common steel plate and contributes to prolonging the service life of mechanical parts.
Application of Abrex 400 Plates:
•Dump Truck Liners
•Cutting Edges
•Ripper Tyne
•Crusher Liner Plates
•Drag line Bucket Wear Liners
•Screen Plates - Chute Liners
•Conveyor Buckets
•Hoppers
•Ore Scraper
Features:
Abrex Sumihard Plates
Material Grade | 500 BHN |
Brand | Abex |
Length | Up to 12000 mm |
Thickness | 3 mm |
Size | 120 mm |
Width | Up to 3000 mm |
ABREX SUMIHARD WARE PLATES IN DUBAI, UAE, SAUDI, EGYPT, BRAZIL, INDONESIA, CHINA, SOUTH AFRICA, USA, EUROPE
Sumihard 400 is a through hardened abrasion resistant steel with a typical hardness of 415 BHN. These steels are the most widely used of the wear resistant grades. They exhibit an excellent combination of high resistance to impact, workability, weld ability and resistance to abrasion. It has about 3 times the abrasion resistance of common steel plate and contributes to prolonging the service life of mechanical parts.
Application:
- Dump Truck Liners
- Cutting Edges
- Ripper Tyne
- Crusher Liner Plates
- Drag line Bucket Wear Liners
- Screen Plates - Chute Liners
- Conveyor Buckets
- Hoppers
- Ore Scrapers
- Size : 5mm ~ 120 mm
Additional Information:
- Item Code: K400
Sumihard 400 Plates
Thickness | 3 mm |
Brand | Abrex |
Length | Up to 12000 mm |
Size | 120 mm |
Width | Up to 3000 mm |
Additional Information:
- Item Code: sumihard400
Stone Crusher Liner Plates Abrex 400
Usage/Application | Jaw Crusher |
Material | Steel |
Brand | Leomet |
Hardness | 400BHN |
Grade | Abrex 400 |
Color | Silver |
We are direct Importers, Stockiest, Fabricators and Suppliers of Abraision Resistance / Wear resisatance steel plates.
We directly supply liner plates to majority of stoner crushers.
majority of the crushers manufacturers uses our plates for maufacturing there liner plates for stone crushers and horizontal impact stoner crushers.
We supply liners as per the drawings provided by the end users.
Abrex 400 and Abrex 500 plates will give you approx 2 times more life then standard high manganese castings.
high Manganese casting break on impact because they are brital in nature and our plates are already pre hard plates so there are least chances of directly breaking the plates.
Stone Crusher Liner Plates Abrex 400 also available in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil, USA & Oman also worldwide
Birnar 400 Wear Plates
Material | Mild Steel |
Color | Black |
Thickness | 100mm |
Size (feet X feet) | 80mm |
Brand | Abrex |
Length | UpTo 12000mm |
Birnar Plates in DUBAI, UAE, SAUDI, EGYPT, BRAZIL, INDONESIA, CHINA, SOUTH AFRICA, USA, EUROPE
We at Leomet Alloys Inc offer Birnar 400 equivalent plates called as Abrex 400 from Nippon Steel Sumitomo Japan
Smooth Surface Wear Plates
Material | Chromium Carbide |
Size | 1200x3000mm |
Brand | Abrex Hardox Quard JFE |
Country of Origin | Made in India |
Hardness | 50 HRC |
Technique, | Arc welding |
About Product:
We are direct Importers and stockiest of Smooth Surface Wear plates in thickness range from 3mm to 80mm
These plates are bydefault 40RC and 50RC from top to bottom , no need of Cromium carbide hard face over lay on these plates.
These plates can be easily cut, drill, weld and machined.
Smooth Surface Wear Plates also available in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide
Ar 400 Plates
Usage/Application | Industrial |
Shape | Rectangular |
Material Grade | Abrex |
Length | Upto 12000mm |
Size | 100mm |
Width | 3000mm |
About Product:
We would like to introduce ourselves as direct importers of wear plates from their respective mills. Please see the following for brands we serve in. We are the lead stockist of Swebor From Swebor Stal Sweden And Abrex From Sumitiomo Japan
Wear Plate Brands:
- SSAB Sweden-- Hardox 400/450/500, Weldox, Domex 700
- Nippon- Sumitomo, Japan-- Abrex 400/450/500 ( Formally know as Sumihard)
- Nippon - Sumitomo, Japan-- Welten 780
- Swebor Stal, Sweden-- Swebor 400/450/500
- Rukki, Finland- Raex 400
- JFE Steel, Japan—Everhard
AR 400 Plates also available in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide
WRS 400 Steel Plates
Material Grade | 370 |
Brand | Hardness HBW |
Thickness | 130 mm |
Shape | Rectangle |
Length | 12000 mm |
Width | 3000 mm |
WRS 400 is an abrasion resistant plate with a hardness of 400 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. Hardox 400 offers very good weld ability.
Applications
Crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, dump trucks, loaders, industrial trucks, lorries, bulldozers, excavators, slurry pipe systems, screw conveyors, presses etc.
Hardness HBW : 370-430
Dimensions :
- Plate thicknesses of 3 mm-130 mm
Heat Treatment :
Hardox 400 has obtained its mechanical properties by quenching and when necessary by means of and Fabrication subsequent tempering. The properties of the delivery condition can not be retained after exposure to service or preheating\ temperatures in excess of 250oC (480o F).
WRS 400 is not intended for further heat treatment For information concerning welding and fabrication please send us
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.
WRS 400 Steel Plates also available in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide
Abrex Sumihard Plates
Size | 120 mm |
Length | Up to 12000mm |
Country of Origin | Made in India |
Application | Dump Truck Liners,Cutting Edges |
Width mm | Up to 3000mm |
Application:
- Dump Truck Liners
- Cutting Edges
- Ripper Tyne
- Crusher Liner Plates
- Drag line Bucket Wear Liners
- Screen Plates - Chute Liners
- Conveyor Buckets
- Hoppers
- Ore Scrapers
Specifications:
- Size: 5mm ~ 120mm
- Width: Up to 3000mm
- Length: Up to 12000mm
Additional Information:
- Item Code: K450
BRINAR 400 WEAR PLATES
Shape | As Required |
Material | Mild Steel |
Thickness | 3mm ~100mm Thickness |
Surface Treatment | QT 400BHN, 450BHN, 500BHN, 600BHN |
Brand | Binar Salzgitter |
Hardness | 400 / 450 / 500 / 600 BHN |
BRINAR 400 is wear-resistant, water-quenched and tempered steel produced by the Salzgitter Group. The high strength and good possibility of further working this steel is achieved by heating the material to 900°C and then cooling it in a water-quenching plant and if necessary subjecting it to tempering heat treatment.
ApplicationWearing parts made of BRINAR steels are used in mining machines.
• Stone mills
• Conveyors
• Materials handling systems
In cement works.
• Mixers,
• Screens,
• Hoppers
Also in the steel industry
• Scrap presses,
• Vibrating screens
• Crushers
BRINAR is produced in different gradesBRINAR 400/ BIRNAR 450/ BIRNAR 500 wear resistants' Plates.
BRINAR 400 Plates produced up to a thickness of 80mm. The surface hardness at room temperature is 360 – 440 Brinell. Cold working by bending or roll bending is possible provided the manufacturer's instructions are complied with. Hot working is possible at 850-1000°C. However, the material must then be hardened and tempered. That type can be cut thermally and welded with each standard procedure. In case of thermal cutting and welding the plate must be preheated from a thickness of 30mm.
Abrex Sumihard Plates
Thickness | 100mm |
Size | 2500mm width |
Material | Hot Rolled |
Usage/Application | Industrial |
Shape | Rectangular |
Material Grade | ABREX |
Density | 7.85 |
Hardness | 600 BHN |
Abrex / sumihard plates in DUBAI, UAE, SAUDI, EGYPT, BRAZIL, INDONESIA, CHINA, SOUTH AFRICA, USA, EUROPE
The Abrex 400 & 500 series (Previously named as Sumihard 400 & 500) is the wear plate series form Nippon Sumitomo Steel Metal Corporation, Japan.
The use of abrasion resistance ABREX steel plate markedly reduces the weight of structural members exposed to serve abrasive conditions. Compare with regular steel, ABREX steel plate reduces structural weight and delivers economic merits.
Adoption of high performance abrasion resistant ABREX will prolong the service life of machinery and component.
We maintain all the sizes and thickness of ABREX / SUMIHARD 400 & 500 from 03mm ~ 60mm thickness
Specifications:
- Standard:AISI, ASTM, BS, DIN, GB, JIS
- Type:Steel Plate
- Technique:Hot Rolled, hot rolled
- Surface Treatment:no
- Application:mining, cement production,etc., High Quality Abrex 400 Stone Crusher Liner Plates
- Special Use:Wear Resistant Steel
- Length:6m,8m,10m,12m,or as required
Additional Information:
- Item Code: ABREX
- Delivery Time: Ready Stock
Abrasion Resistant Steel Plates 400
Usage/Application | Industrial |
Shape | Rectangular |
Material Grade | Abrex 400 |
Brand | Abrex |
Thickness | 1 mm |
Type | Steel Plate |
Width | 3000 mm |
Length | 12000 mm |
We would like to introduce ourselves as direct importers of wear plates from their respective mills. Please see the following for brands we serve in. We are the Lead Stockist Of Swebor From Swebor Stal Sweden And Abrex From Sumitiomo Japan
Wear Plate Brands:
- SSAB Sweden-- Hardox 400/450/500, Weldox, Domex 700
- Nippon- Sumitomo, Japan-- Abrex 400/450/500 ( Formally know as Sumihard)
- Nippon - Sumitomo, Japan-- Welten 780
- Swebor Stal, Sweden-- Swebor 400/450/500
- Rukki, Finland- Raex 400
- JFE Steel, Japan—Everhard
We also provide forward integration facilities for the wear plates. We can cut, drill, counter sink, counter bore, tap wear plates, wear parts, wear liners and other components made of wear resistant steel as per your drawing. We have the knowledge to guide you about the wear lives of different solutions in your specific application. We can prepare a wear graph for your specific case and help you to get the best wear life possible.
Size: 3mm~100mm, Width: 100mm~3000mm.
Abrasion Resistant Steel Plates 400 in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide
JSPL Everhard 400
Material Grade | Abrasion Resistant Steel Plates |
Type | Plates |
Thickness | 50 mm |
Size | 2000 mm X 12000 mm |
Usage/Application | Industrial |
Hardness | 400 BHN |
High quality rockhard jindal steel & power limited plates, rockhard jspl hot rolled plates, rockhard jspl plates suppliers, abrasion resistant jspl rockhard steel plates, wear resistant jspl rockhard plates, rockhard jspl plates stockist in mumbai, india. Jspl rockhard 450 sheet and plate exporter, high strength rockhard 400 jspl plates, jspl brand rockhard 500 plates dealer, jspl rockhard cold rolled plates, jspl rockhard plates supplier in mumbai, india.
Additional Information:
- Delivery Time: READY STOCK
- Packaging Details: LOOSE
Drilling Abrex 400 Wear Resistance Plates
Material Grade | 400 |
Material | Alloy |
Usage/Application | Industrial |
Color | Black |
We are direct Importers , Stockiest, Fabricators and suppliers for Wear resistance plates.
Features:
- Grades :- Abrex 400, abrex 400 Lt , Abrex 500, Abrex 500 Lt.
- Thickness :- 4mm to 80mm.
AWe can provide drilling and machining facility for the products and directly supply you the end material.
Drilling :-
1.) Trough hole
2.) Counter sink
3.) Counter Tap
4.) Counter boaring
5.) and any type of holes
We have inhouse facility for the processes.
Abrex 400 Wear Resistance Plates - Drilling also available in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil, USA & Oman also worldwide
Abrex 400 Plates
Shape | Rectangular |
Size | 100 mm |
Thickness | Upto 6 mm |
Width | Up to 3000 mm |
Length | 12000 mm |
Material Grade | Abrex 400 |
Pattern | Plain |
ABREX 400 is a through hardened abrasion resistant steel with a typical hardness of 400 BHN. ABREX 400 steels are the most widely used of the wear resistant grades. They exhibit an excellent combination of high resistance to impact, workability, weld ability and resistance to abrasion. It has about 3 times the abrasion resistance of common steel plate and contributes to prolonging the service life of mechanical parts.
Application of Abrex 400 Plates:
- Dump Truck Liners
- Cutting Edges
- Ripper Tyne
- Crusher Liner Plates
- Drag line Bucket Wear Liners
- Screen Plates - Chute Liners
- Conveyor Buckets
- Hoppers
- Ore Scrapers
Specifications:
- Size : 5mm ~ 120 mm
Abrex 400 Plates in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide
Additional Information:
- Port of Dispatch: Mumbai
Raex 400 Plates
Type | Plate |
Material | SS |
Shape | Rectangular |
Material Grade | RAEX 400 |
Surface Treatment | Hot Rolled |
Color | Grey |
Applications | Heavy lifting, Transportation, & Mining Industries |
About Product:
We at LEOMET involved in supply of Raex 400 is high-strength and wear-resistant steel with favourable hardness and impact toughness.
With Raex you can extend the lifespan of machinery, decrease wear in structural components and save costs.
Raex high-strength and wear-resistant steels also enable innovative design and lightweight products improving energy efficiency and lowering fuel costs.
Raex is utilised in various applications of mechanical engineering by, for example, the automotive, heavy lifting and transportation, and mining industries.Applications:
- Buckets and containers
- Cutting edges for earth moving machines
- Wearing parts for mining machines
- Wearing parts for concrete mixing plants and wood processing machines
- Platform structures
- Feeders, funnels
Raex 400 Plates also available in Dubai, China, South Africa, Kenya, Africa, UAE, Saudi, Brazil & Oman also worldwide